ATCOM A68w - Pre-Dial; Multiple Line Dial-Up

A68(W) IP Phone User Manual
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn15
3. Pick up the handset, press and enter “Directory”, then find the contact person and
press “Dial” soft key.
E. Dial from call history
1. Press key to enter the menu and choose “History” option, then select one of call
history entry, and press "Dial" soft key or pickup the handset to call this number.
2. Pickup the handset, press "History” soft key, then select one of call history entry, and
press "Dial" soft key to call this number.
3. Pickup the handset, press and enter “Call History” ,then select one of call history
entry, and press "Dial" soft key to call this number.
2.3、Pre-dial
It’s a method to dial a phone number immediacy at standby mode.
The method is as below：
A、Dial-up the phone number at standby mode
B、Press soft key "Dial"or Pick up the handset or Press or to send out the
number.
2.4、 Multiple line dial-up
A68(W) supports 6 SIP lines. That means user can register 6 different sip accounts
simultaneity. User is able to choose line1, line2, line 3 , line 4, line 5 or line 6 by pressing
corresponding line key. Line1 or the 1
st
Line registered successfully under idle is the priority to
pick up the calls.
A68(W) maximum supports 24 concurrent calls, that means24 calls can be setup on each of
single line, but the total number of concurrent calls on all lines can not more than 24. When
there is an incoming call to another line, LCD will show the incoming phone number and line