A68(W) IP Phone User Manual
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn88
The account to apply this dial plan, blank
or 1 to 6 is valid. Number 1 to 6 means
account 1 to 6. If you want to apply this
rule to account 1、3 and 4,just type in
1,3,4; And if keep it as blank, it means
applying this dial plan to all accounts
It means the phone
will use the 1st
available account to
call 6033 after “Dial-
now Time-out”
seconds when
inputting four figures
begin with 6
Note：Dial-now rule
is different with
hotline. The Dial-now
rule will take effect
when input numbers
matches the dial
plan, and hotline
takes effect in
situation that the
phone is in dialing
state
Multiply dial-now rules can be configured in
one phone, after one dial-now dial plan
configured, click this button to add a new
one
The existed dial-now dial plans are
editable. The specified dial plan should be
selected until it is covered with orange and
the input fields “Number” and “Dial-now”
shows the details correctly. After
modifying, click button “Edit” to make it to
be effect
Delete one added or saved dial-now dial
plan or multiple ones, click the frame after
the specified dial-now dial plan before
delete it, and then click button “Delete”
Any alteration won’t take effect until the
button “Save” is clicked.
Set “Dial-now Time-out” via web: Phone→Features→General Information→Dial-now
Time-out (secs).
4.6.3、Area Code
Dial plan “Area Code” has been defined to identify each different area. To call a phone number
of other areas, user must add the area code to be in front of the phone number. For
convenience, area code has been recommended to be configured while frequently dialing to
that type of phone number.
To Next Page
Loading...
