ATCOM A68w - How to Make IP Peer to Peer Call; 7 Troubleshooting; Thephone Is Failed to Register to SIP Server; Thephone Is Failed to Gain IP Address

A68(W) IP Phone User Manual
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn94
g) After upgrading completed, the phone will be started with the factory default settings
6.3、How to make IP Peer to Peer call
To make a IP peer to peer call, user shouldpress“*”to input “.” that in the IP address. For
example, to dial “192.168.1.100”, just need input “192”,“*”,“168”, “*”,“1”, “*”,”100”.
7、Troubleshooting
7.1、Thephone is failed to register to SIP server
1. First of all, check the IP address. If the LAN port is DHCP, please ensure the DHCP server
has been enabled.
2. Check the network gateway
3. Check the DNS
4. Make sure the input account matched the one provided by Service Provider
5. Make sure SIP Server has been enabled already
6. Make sure the Port of SIP Server, it’s 5060 by default
7.2、Thephone is failed to gain IP address
1. Make sure the network cable has been plugged into the LAN port