ATCOM A68w - Page 32

A68(W) IP Phone User Manual
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn32
Item
Operation
Description
Call Waiting
Press the key 、
or softkey “Switch”to
setup
Switch on or Switch off the feature.
“Enable”mean this feature is
enabled，“Disable”mean this feature
is disabled.
Call Waiting Tone
Press the key 、
or softkey “Switch”to
setup
Switch on or Switch off the prompt
playing. “Enable”mean this feature is
enabled，“Disable”mean this feature
is disabled .
Setup call waiting via web:“Phone”→ “Feature”→ “General information”→ “Call
Waiting”.
Setup call waiting Tone via web: “Phone”→ “Feature”→ “Audio Settings”→ “Call
Waiting Tone”.
3. Auto Answer
The feature of “Auto Answer” is switched off by default.All incoming calls will be answered
automatically when the phone is standby once “Auto Answer” is activated. “Auto Answer”when
the phone is under “on Calling” status.
The Icon will be indicated once “Auto Answer” is available。