AT-610
User Manual
ATCOM TECHNOLOGY CO. , LIMITED
Attended transfer :
Only SIP support attended Transfer. If A is using AT610 talking with B , B
want to speak to C. A just press " Hold " and dial C ’ s number to ask whether he
would answer the call from B. If C agree s , A press " Hold " to talk with B then
press " XFER " to transfer the call .
5
5
5
5
、
3
3
3
3 -
-
-
- way
way
way
way conference
conference
conference
conference call
call
call
call
Enable Three Way Call
If A is using AT610 talking with B and B want to make conference call with A
and C . A just press " Hold " and dial C ’ s number. Then press " CONF " to initiate
conference call .
6
6
6
6
、
Call
Call
Call
Call Hold
Hold
Hold
Hold
User can hold the current call by pressing “ Hold
”
. And press s oft “ Hold ”
again to resume the call .
7
7
7
7 、 Call
Call
Call
Call History
History
History
History
AT-610 support s 100 missed calls, incoming calls and dialed call s record . When
the storage is full, the latest call will update the history. When the phone reboots
or be out of power, all the call history will be cleared.
Missed call
1) When the LCD screen display the Missed call icon and the status LED is 2s on ,
500ms off .
2) Press history button, press “ Vol+ ” or “ Vol- “ to LCD display “ Missed
”
.
3) P ress “ Menu/Enter ” to display the records of Missed call .
4) Press “ Vol+ ” or “ Vol- “ browse missed call history.
5) Choose the missed call record, press “ Redial ” button to call this number.
Incoming call
1) Press “ History ” button and press “ Vol+ ” or “ Vol- “ to LCD display “ RECEIVED
”
.
2) Press “ Menu/Enter ” to display received call records.
3) Press “ Vol+ ” or “ Vol- “ browse received call records.
4) Choose the received call record, press “ Redial ” button to call this number.
I f there is no record, the LCD screen display “ List is Empty ” .
Out coming call
1) Press “ History ” button and press “ Vol+ ” or “ Vol- “ to LCD display
“ DIALED ” .
2) Press “ Menu/Enter ” to display out coming call records.
To Next Page
Loading...
