AT-610
User Manual
ATCOM TECHNOLOGY CO. , LIMITED
Media Key: voice stream encryption Key .
4.2.
4.2.
4.2.
4.2. Digital
Digital
Digital
Digital Map
Map
Map
Map
Digit map is a set of rules to determine when the user has finished dialing.
AT610 support below digital map:
End With “ # ” : Use # as the end of dialing.
Fixed Length: The call will be sent out automatically when the length of the
number you dial reaches the fixed one. For example if you set number of 11
here, when you dial 11 digits the call will be sent out immediately.
Timeout: Specify the timeout of the last dial digit. The call will be sent after
timeout .
Prefix: User define digital map:
[ ] represents the range of digit, can be a range such as [1-4], or use
comma such as [1,3,5], or use a list such as [234]
x represents any one digit between 0~9
“ Tn ” represents the last digit timeout. n represents the time from 0~9
second, it is necessary. “ Tn ” must be the last two digits in the entry. If “ Tn ”
is not included in the entry, we use T0 as default; it means system will send
the number immediately if the number matches the entry.
Example:
[ 1-8] xxx all number from 1000 to 89999 will be sent immediately.
9xxxxxxx 8 digits numbers begin with 9 will be sent immediately.
911 Number 911 will be sent will be immediately .
88xT4 3 digits numbers begin with 88with be sent after 4s.
6611x.T4 holds four seconds send out if the number begins 6611 and
five digits.
To Next Page
Loading...
