AT-610
User Manual
ATCOM TECHNOLOGY CO. , LIMITED
levels in debug information: Level 0---emergency: This is highest default debug
info level. You system cannot work.
Level 1---alert: Your system has deadly problem.
Level 2---critical: Your system has serious problem.
Level 3---error: The error will affect your system working.
Level 4---warning: There are some potential dangers. But your system can
work.
Level 5---notice: Your system works well in special condition, but you need to
check its working environment and parameter.
Level 6---info: the daily debugging info.
Level 7---debug: the lowest debug info. Professional debugging info from R&D
person.
At present, the lowest level of debug information send to Syslog is info, debug
level only can be displayed on telnet.
The items describe:
Server IP ： Syslog server IP address
Server Port ： Syslog server port
MGR Log Level ： config MGR log level
SIP Log Level ： config SIPlog level
IAX2 Log Level ： config IAX2log level
Enable Syslog ： Enable/Disable Syslog
To Next Page
Loading...
