Need help?Do you have a question about the Ateis PPM-IT5 and is the answer not in the manual?
General| Brand | Ateis |
|---|---|
| Model | PPM-IT5 |
| Category | Microphone |
| Language | English |
Disclaimer of liability for damages resulting from improper product use.
Details potential interference with radio or television equipment.
Lists essential safety measures for device operation and handling.
Welcomes users and provides details on manual updates.
Overview of ATEÏS, its history, and quality standards.
Lists the various audio equipment types manufactured by ATEÏS.
Details on the development team and market application fields.
Contact addresses, phone, and fax for global ATEÏS offices.
Lists core features like screen size, interfaces, and power supply.
Describes power supply methods: external 24V or PoE.
Explains control via web server and TERRA-SERVER software.
Steps required for the initial setup of the PPM-IT5 unit.
Steps to set PC IP for device network connection.
Guide to connecting the device using a Cat-5 cable.
Instructions for changing the device's IP address.
Details on configuring SIP server and network settings.
Configuration for SIP server and WAN IP settings.
Adding devices to the address book for direct calling.
How to assign devices or commands to touchscreen buttons.
How to use the address book to call phone numbers or devices.
Create groups of devices for scheduler-based actions.
Control third-party devices using string commands.
Manage logic outputs of external devices.
Create and assign sequences of commands to buttons.
Group devices for simultaneous paging.
Set logic states for buttons, requiring manual reset.
Allow third-party devices to control the PPM-IT5.
Display status of non-Terracom devices on the PPM-IT5.
Steps to create a macro and link it to a button.
Procedure to create device groups for scheduler use.
Details on configuring Command (String) for external devices.
Steps for setting logic outputs on remote devices.
Setting logic states for buttons that require manual reset.
Enabling communication for third-party control features.
Illustrates how to configure a 'Call' function for a device.
Demonstrates the setup for a 'Hang Up' function.
Using UDP Test Tool to verify external variable functionality.
Procedure to manually request and check device status.
Detailed steps for setting up command strings for status checks.
Configuring buttons to show external device status.
Assigning status-displaying buttons on the main interface.
Performing tests using UDP software for status verification.
Setting up the device for automatic status updates.
How the UDP software handles automatic status requests.
Choosing between G.711, G.722, or Linear 16bit.
Description of the main screen layout and controls.
Locating the IP address on the touchscreen.
Uploading .wav files for prerecorded messages.
Customizing pre- and post-chime sounds.
Configuring the time using manual or NTP settings.
Creating and linking functions to the scheduler.
Steps for integrating with ECS systems.
Instructions for connecting the PPM-IT5 with UAPG2.
Configuring network parameters directly on the PPM-IT5.
Finding available devices on the network.
Procedure for adding discovered devices.
Linking functions to the PPM-IT5 touchscreen buttons.
Grouping multiple devices for simultaneous paging.
Step-by-step guide for creating an 'ALL CALL' function.
Checking the configuration of created paging groups.
Setting up the IDA8 system for communication.
Configuring the Contact Manager for device interaction.
Setting up the PPM-IT5 to communicate with the IDA8.
To Next Page