ATEQ VT67 - 7.1 MANUAL RELEARN

Pg. 12
7.1 MANUAL RELEARN
1 2 3
FromtheResetTPMSmenu,select
theManualdrop-downmenu.
Followtheinstruconstoputthe
vehicleintolearnmode.Once
nished,selectBeginProcedure.
Beginbytriggeringtherstsensor
menonedintheinstrucons.The
instruconscanbereturnedtoat
anypoint.
4
Inmostcases,thehornwillhonk
oncetoindicatethatthesensorhas
beensuccessfullytriggered.The
sensorinformaonwillbedisplayed
on-screen.
5
Connuebytriggeringtheremaining
sensors.Oncecomplete,thehorn
willhonktwiceindicangthe
procedureiscomplete.
FormanyMakesandModels,thevehiclemustbeputintoa“learn”modebeforethesensorscanberelearned.The
toolprovidesinstruconsonhowtoperformtheseprocedures.*Note:Notallvehicle’shaveManualproceduresand
manyproceduresaredierent.Refertothetool’sbuilt-ininstruconsforeachspecicprocedure.