ATEQ VT67 - 9.3 PLACARD ADJUSTMENT

Pg. 26
9.3 PLACARD ADJUSTMENT
1
First,selectPlacardAdjustmentfrom
theDiagnoscsmenu.
3
IMPORTANT:Besuretoreadthe
disclaimeraboutchangingplacard
valuestotheirappropriatevalues.
Whennished,selectOK
Whenchangingresizesorloadtypes,thePlacardAdjustmentfunconcanbeusedtoedittheinternalplacard
values.ThiswillensurethattheTPMSlightwillcomeonatthecorrectPSI.
2
Then,connecttheOBDIIQuickConnectCableintothetoolandtheninto
thevehicle.Onceconnected,selectReadPlacard.
4
Thetoolwilldisplaythecurrent
placardvaluesstoredforeachaxle.
5
Selecngthedropdownmenuforeach
axlewillrevealalistofvalues.Scroll
throughthelistandselectthedesired
value.
a
B