ATEQ VT67 - 8.5 COPY SET

Pg. 19
8.5 COPY SET
1
First,selectSetfromtheProgram
menu.
4
Placetheoriginalsensorabovethetool’santennaandselectCopy.Youcan
alsocopythesensorIDfromtheoriginalsensorifitissllinstalledinthe
wheel.
CreateSetallowsyoutoprogramnewIDsto4blankaermarketsensorsallonthesamescreen.
2 3
Then,selectCopySet. Thetoolwilldisplayachartwith4
wheelsandacopybuonforeach.
ThecopiedsensorIDwillbe
displayed.TheTOBECOPIED
columnwillnowallowyouto
programanewsensorforthat
wheel.
5
OR