ATEQ VT67 - 9.4 TPMS ID MATCH

Pg. 28
9.4 TPMS ID MATCH
1
First,ensurethatallsensorsonthevehiclehavebeenproperlyscanned.
3
Then,connecttheOBDIIQuick
ConnectCableintothetoolandthen
intothevehicle.Onceconnected,
selectRetrieveIDs.
Insomecaseswhenchangingresarelearnmaynothavebeenperformedcorrectly,asensornotprogrammed
properly,orsensorswerereplacedintheincorrectposions.TheTPMSIDMatchfunconallowsyoutoscanthe
currentsensors,thenhookuptothevehicleandcomparetheIDswiththeonesstoredintheECU.
2
Then,fromtheDiagnoscsmenu
selectTPMSIDMatch.
4
ThetoolwilldisplayachartwiththescannedIDs,aswellastheonesstored
inthevehicle.IfallsensorsareGreen,youaregoodtogoandnofurther
aconisrequired.IfanyofthesensorsareRed,thatmeansarelearnneeds
tobeperformedandyoucanselecttheRelearnbuontoautomacallytake
youtotheRelearnfuncon.
a
B
LF / RF/ RR/ LR