ATEQ VT67 - 8.2 CREATE

Pg. 16
8.2 CREATE
1 2
First,selectCreatefromtheProgram
menu.
Placethesensorabovethetool’santennaandselectProgram.
3
Aerafewmomentsthenewsensor
IDwillbedisplayedandthesensor
willbesuccessfullyprogrammed.
CreateallowsyoutoprogramanewIDtoablankaermarketsensor.SensorIDscanalsobeoverwrien,if
programmedagainforadierentvehicleorapplicaon.