ATEQ VT67 - 7.2 OBDII RELEARN

Pg. 13
7.2 OBDII RELEARN
1 2 3
BeginbytriggeringtheLFsensoron
thevehicle.
ConnuebytriggeringtheRF,RR,
andLRsensors.*ForHonda/Acura:
LR,RR,andRF.
SelecttheResetTPMSmenuand
selecttheOBDIIdrop-downmenu.
4
SelectBeginProcedure.*Note:Ifall
sensorshavenotbeentriggeredyou
willbetakenbacktothemainvehicle
screentonishtriggering.
5
ConnecttheOBDIIQuickConnect
Cabletothetopofthetool,then
intothevehicleandselectRelearn.
OBDIIRelearnsrequireuseoftheOBDIIQuickConnectCableandareperformedbytriggeringeachsensor,then
connecngthecabletothetool/vehicletocompletetheprocedure.*Note:Notallvehicle’shaveOBDIIprocedures
andsomeproceduresaredierent.Refertothetool’sbuilt-ininstruconsforeachspecicprocedure.
6
Aerafewmoments,allofthe
sensorswillhavebeensuccessfully
relearnedtothevehicle.
a
B