41
5.4.5. Demo program
With Demo Mode disabled, click
in the white box to the right of
the circle. The circle moves to the right and the left field turn
The demo program is now activated.
It enables a hardware test of the fixture. The different colour channels of the LED spots
and the individual sections are dimmed up or down one after the other.
To end the function, click on the green field to the left of the circle.
5.5. Function of the "Language" tab
Click on "Language" and then select whether the dis
should be in "Deutsch" or "English".
6. Perform hardware reset
To the right of the Ethernet socket of the black plastic box is an approx.
1mm large open
ing. Press the micro button behind this opening with a
thin object (e.g. paper clip) for approx.
3 seconds until both green LEDs
light up constantly.
The reset process can take several minutes. Your fixture is then back in access point
mode
. You must reconnect to the luminaire as described in section 4.
Important!
All settings are reset. Changed password or WLAN settings must also be made again after
a reset.
It enables a hardware test of the fixture. The different colour channels of the LED spots
and the individual sections are dimmed up or down one after the other.
To the right of the Ethernet socket of the black plastic box is an approx.
ing. Press the micro button behind this opening with a
3 seconds until both green LEDs
The reset process can take several minutes. Your fixture is then back in access point
. You must reconnect to the luminaire as described in section 4.
All settings are reset. Changed password or WLAN settings must also be made again after
To Next Page
Loading...
Need help?
General