Atlas Copco BLM 3750 - Page 15

BLM 3750 User Guide BLM 3750 Overview
9836 3078 01 Edition 2.0 15 (78)
The software running on the BLM 3750 are:
Main software
The main software is started automatically and executes tool
testing. See the chapter Executing a Free Test for details.
Torque Supervisor (Full or Client)
Torque Supervisor is optional software to store the archive of the
tools to be tested, scheduling the tests, producing report and
statistics.
See the chapter Working with Torque Supervisor for details.
L_b_oil
This application, started automatically, monitors the battery
charge inside the bench, and provides warnings if necessary.
QAT Bench Backup
This application, started automatically, executes system backup.
See the chapter Hardware Protection Key: System Backup for
details.
Atlas Copco Remote Service
This application can be used by the Atlas Copco service personnel
for maintenance activities.