BLM 3750 User Guide Revision history
9836 3078 01 Edition 2.0 3 (78)
Revision history
software
2007-01 14-02-2007 M. Grippa New Edition
2007-02 05-09-2007 M. Grippa Test Setup section updated
2008-01 12-02-2008 M. Grippa Introduction review
2009-01 17-09-2009 M. Grippa Tool calibration function from Torque
Supervisor added (par. 4.1), Hardware
protection key feature added (par. 2.4)
4.0
2.0 11 June 2013 M. Grippa New manual edition fully revised. 4.3
Copyright Atlas Copco Industrial Technique AB
NOTE: This manual may be altered without further notice.
For further information log on to Atlas Copco www.atlascopco.com
NOTE: In the event of conflicts between translations of this user guide, always refer to the
official English version.
Contents
Contents ......................................................................................................................... 3
SAFETY INSTRUCTIONS ................................................................................................. 5
BATTERIES INFORMATION according to European regulation 2006/66/CE .................... 6
1 Introduction ........................................................................................................... 7
1.1 About This Document ............................................................................................... 7
1.2 Reference Documents .............................................................................................. 8
To Next Page
Loading...
Need help?
General
