FlexiROC T30 R 3 Risks and Hazards
12 No: 3133793291.1.3133851403 en-US
High liquid temperature can causes a risk of scalding.
To minimize risk:
n Release pressure before removing the radiator filler cap (A).
n Release pressure before removing the filler plug (B) on the compressor oil tank.
3.7 Cable-Break Hazard
Cable Break Hazard
Breakage of winch cable can cause a risk of tipping, sliding, or whipping.
To minimize risk:
n Always perform the checks described in the operation instructions before using the
winch.
3.8 Pressurized Systems Hazard
Leaking fluid systems can cause fluid injection into flesh and erosion of flesh.
How to minimize the risk:
n Ensure that the system is depressurized before maintenance work is started.
n Replace worn hoses.
n Never replace high pressure hoses with hoses of lower quality than the original.
n Never replace high pressure hoses with hoses fitted with removable couplings.
3.9 Hazard Zones
Hazard zones are areas within or around the machine in which a person can be exposed to
a hazard. Take necessary precautions while working within the hazard zone.
To Next Page
Loading...
Need help?
General
