EasyManua.ls Logo

Atlas Copco FlexiROC T30 R

Atlas Copco FlexiROC T30 R
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FlexiROC T30 R 5 Safety Functions
23 No: 3133793291.1.3133851403 en-US
5.3.5 In Case of Fire - Fire Extinguisher
!
NOTE: Follow local regulations in case of fire.
Precondition
p
Parking brake is applied.
1.
Use a handheld fire extinguisher to extinguish the fire. Follow the manufacturer's in-
structions.
2.
Perform the following steps only if this does not jeopardize your safety:
a.
Turn off the main power switch and the battery isolation switch, or whichever is
present on the machine.
b.
Close the fuel supply valve, if present.
!
NOTE: Do not restart the machine until the cause of fire has
been established and faults have been corrected.
3.
Replace used fire extinguishers with approved new extinguishers.
4.
Clean out any extinguisher residue in the machine before operation.
5.3.6 Actions After Fire
!
NOTE: Do not restart the machine until the cause of fire has been established and
faults have been corrected.
Precondition
p
Handheld fire extinguishers has been used.
1.
Replace used fire extinguishers with approved new extinguishers.
2.
Inspect the fire fighting equipment.
3.
Replace damaged parts on the machine.

Table of Contents

Other manuals for Atlas Copco FlexiROC T30 R

Related product manuals