Atlas Copco FlexiROC T30 R Safety

FlexiROC T30 R 3 Risks and Hazards
14 No: 3133793291.1.3133851403 en-US
3.9.1 Hazard Zone When Using Winch
It is strictly forbidden to stand in front of or below the machine while using the winch.
The size of the hazard zone depends on the used length of the winch wire. Keep the dis-
tance of the winch wire x 1.1 to ensure that the winch wire cannot hurt anyone if it breaks
or releases from the attachment points.
3.10 Work Requiring Special Authorization
All diagnosis, repair, maintenance, and troubleshooting must only be performed by trained
and/or authorized personnel depending on the type of system
n Electrical system
n Climate control unit
n Air and hydraulic system
n Mechanical system
n Machine software
n Crawler tracks

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English