Atlas Copco FlexiROC T30 R

FlexiROC T30 R 7 Noise and Vibration
29 No: 3133793291.1.3133851403 en-US
7.8 Vibration Reduction
n Do not expose the machine to higher loads, speeds, or performance factors than spec-
ified. Excessive loads and mechanical wear increases vibration.
n Use the machine correctly together with related equipment required for the task. Use
of incorrect equipment can cause increased vibrations.
n Using remote control can reduce vibrations.
n Avoid large holes and uneven ground when tramming. Adapt the speed to the tram-
ming conditions to reduce vibrations.
!
NOTE: For more information about how to combat the vibration levels at your worksite,
see ISO/TR 25398