Atlas Copco FlexiROC T30 R Safety

FlexiROC T30 R 8 Signs
31 No: 3133793291.1.3133851403 en-US
8 Signs
8.1 General Guidelines
n It is essential that all machine signs are in correct locations, are clean and fully legible.
n To clean a sign, use only a soft cloth, water, and soap. Do not use solvent, gasoline,
etc.
n Replace any missing or damaged signs. Contact your Atlas Copco representative for
new safety signs.
8.2 Warning Signs
Image Description
High noise level.
Can permanently impair hearing.
Use approved hearing protection.
Risk of slipping.
Danger of scalding and pressure.
Can cause severe injuries.
Release pressure before removing the cap/lid.
Engine Air Filter
Can cause severe injuries.
Release pressure before removing the cap/lid.
Danger from moving and rotational parts
Can cause severe injuries.
Keep away from machine work area during operation.
Danger from swinging and crushing parts.
Can cause severe injuries.
Keep away from hazardous areas during operation.
Burn hazard, hot surface
Can cause severe injuries.

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English