FlexiROC T30 R 10 Environmental Protection
39 No: 3133793291.1.3133851403 en-US
10 Environmental Protection
10.1 Environmental Guidelines
The environmental effect of the machine depends highly on its use and condition. A well-
maintained, fully-functional and correctly-used machine will have the least overall environ-
mental impact regarding operation and maintenance. Read and follow the given guidelines
whenever using or working with the machine.
!
NOTE: Observe the local risk analysis for the local worksite.
NOTE: Follow local regulations concerning the use and maintenance of machinery.
n Ensure adequate training for operators and service personnel.
n Use biologically degradable hydraulic fluids and lubricants when refilling during opera-
tion. Contact Atlas Copco for more information. See www.atlascopco.com
n Avoid prolonged idling and switch off the engine when not required.
n Use automatic speed control, if available.
10.2 Oils and Greases
n Leaking hydraulic couplings and grease are hazardous to the environment. Perform
regular checks and make sure that there are no leaks on the machine.
n Contact Atlas Copco at www.atlascopco.com for information about biologically-degrad-
able hydraulic fluid and lubricants.
10.3 Fuel Spill
Fuel spill is a fire hazard and an environmental hazard. Avoid fuel spills when filling the
tank. Fuel fumes are extremely explosive.
10.4 Exhaust Gases
n Exhaust gases are toxic. Good ventilation is necessary when the engine is running.
n Regular maintenance of the air filters can keep emission levels low.
10.5 Handling of Spills and Waste during Maintenance
n Clean oil and fuel residue and spills in accordance with local regulations.
n Dispose of expired or worn out batteries in accordance with local regulations.
n Do not burn oil residues or flush it into drains or water systems.
n Collect oil-content waste, such as filters and rags, in separate containers and dispose
it in accordance with local regulations.
n Do not mix coolant and brake fluids with oil spills. Collect coolant, brake fluids and oil
spills in separate containers and dispose in accordance with local regulations.
10.6 End-User Responsibility During Disposal
Always follow local regulations for waste and recycling.
To Next Page
Loading...
Need help?
General
