Step Action
7 After carrying out all service actions in the relevant “Service Plan”, reset the service
warning as follows:
•
Press the “Menu” key (3).
•
Press key (1) until “Service” is followed by an arrow pointing to the right. Activate the
menu by pressing key (2).
•
Press key (1) until the related “Service Plan” is followed by an arrow pointing to the
right and activate by pressing key (2).
•
Press the “Reset” key (3); the timer is reset to 0.
6.5 Oil filter change
Warning
Stop the compressor and switch off the voltage. The operator must apply all relevant Safety
precautions.
Control panel
Control panel, MkIII regulator
Instruction book
98 2920 1475 06
To Next Page
Loading...
