Atlas Copco MT Focus 6000 - On;Off Switch on Power Supply Unit

MT Focus 6000 EN Product information
© Atlas Copco Industrial Technique AB - 9839 0470 01
5
A Display
B Indicator light
C Arrow buttons
D OK button
E Back button
Button Name Description
Arrow buttons Use the arrow buttons to navigate
in the menus on the display.
Use the arrow buttons to set numer-
ical values on the display.
Back button Use the back button to move back
between menus.
In some cases you can use the back
button to cancel a selection.
OK button Press the OK button to confirm a
selection.
Hold the OK button to open the lo-
gin/reboot menu.
On/off switch on power supply unit
The on/off switch to the controller is located on the external power supply unit
(PSU).
The on/off switch on the PSU must be easy to access.