Atlas Copco Power Focus 600 - Page 31

Power Focus 600 EN
© Atlas Copco Industrial Technique AB - 9836 4954 01
31
Parameter Description Default value
First torque Target torque for the first step.
First torque Torque during first step.
{ , : noprofile in element [entry]}
{ , : noprofile in element [p]}
80% of Target Torque
First speed Target speed for the first step.
First speed Tool speed during first step.
{ , : noprofile in element [entry]}
{ , : noprofile in element [p]}
50% of Tool max speed
Conditioning speed Target speed during the condition-
ing step.
Conditioning speed Tool speed during the conditioning
step.
{ , : noprofile in element [entry]}
{ , : noprofile in element [p]}
50% of Tool max speed
Conditioning angle Angle to turn the socket during the
conditioning step.
180°
Fine-tuning the Three step strategy
When the First target is reached and the conditioneing step is entered the tool
will make an immediate stop and reverse before it continues with the final step.
This conditioning step could need to be fine-tuned to improve ergonomics for
hand-held tools.
Rotate
The Rotate strategy is primarily a strategy for testing and demo purposes. When
letting the tool rotate in free air, it will turn the socket the specified angle using
the lowest torque possible.