- 46 -
5.4.10 Stopping status
Other actions and signals have no effect in this status.
5.4.11 Start failure status
First a stopping procedure is executed, and the
operator has to wait.
Sreen A: Start failure, origin in Permissive start
status.
Sreen B: Start failure, origin in Cranking status.
Other actions and signals have no effect in this status.
S Warnings R Are shown on the screen
A Shutdowns R To shutdown status (see
section 5.4.12)
A Stopping procedure has
ended
R If manual start:
To Ready for Start status
(see section 5.4.2)
If automatic start:
To Standby status (see
section 5.4.3)
If Power OFF:
End of operation
A Emergency Stop button R To emergency Stop
status (see section 5.4.13)
A ↓-button, press once R Set pressure - 0.1 bar
A
↑
-button, press once R Set pressure + 0.1 bar
A ↓-button, press
continuously
R Set pressure - 0.1 bar/
second
A
↑
-button, press
continuously
R Set pressure + 0.1 bar/
second
S Warnings R Are shown on the screen
A Emergency Stop button R To emergency Stop
status (see section 5.4.13)
A ↓-button, press once R Set pressure - 0.1 bar
A
↑
-button, press once R Set pressure + 0.1 bar
A ↓-button, press
continuously
R Set pressure - 0.1 bar/
second
A
↑
-button, press
continuously
R Set pressure + 0.1 bar/
second
A Power OFF switch R End of operation
A Reset button R To Ready for Start status
(see section 5.4.2)
To Next Page
Loading...
