Atlas Copco PTS 1600 Cud S3A/T3 APP - Shutdown Status; Emergency Stop Status

- 47 -
5.4.12 Shutdown status
First a stopping procedure is executed.
Other actions and signals have no effect in this status.
5.4.13 Emergency stop status
Screen A: Emergency Stop is pressed.
Screen B: Emergency Stop is unlocked.
Other actions and signals have no effect in this status.
S Warnings R Are shown on the screen
A Emergency Stop button R To emergency Stop
status (see section 5.4.13)
A ↓-button, press once R Set pressure - 0.1 bar
A
↑ -button, press once R Set pressure + 0.1 bar
A ↓-button, press
continuously
R Set pressure - 0.1 bar/
second
A
↑ -button, press
continuously
R Set pressure + 0.1 bar/
second
A Power OFF switch R End of operation
A Reset button R To Ready for Start status
(see section 5.4.2)
S Warnings R Are shown on the screen
A ↓-button, press once R Set pressure - 0.1 bar
A
↑ -button, press once R Set pressure + 0.1 bar
A ↓-button, press
continuously
R Set pressure - 0.1 bar/
second
A
↑ -button, press
continuously
R Set pressure + 0.1 bar/
second
A Power OFF switch R End of operation
If Emergency Stop is locked:
A Unlock Emergency Stop R To screen B
If Emergency Stop is unlocked:
A Lock Emergency Stop R To screen A
A Reset button R To Ready for Start status
(see section 5.4.2)