Atlas Copco QAS 500 Volvo S2A APP - Mains Setup

- 57 -
Mains setup
7001 Day setting
-20000kW – 20000kW
7002 Night setting
-20000kW – 20000kW
7003 Transducer range max.
0 – 20000kW
7004 Transducer range min.
-20000kW – 0kW
7011 Start Hour
0h – 23h
7012 Start Minute
0' – 59'
7013 Stop Hour
0h – 23h
7014 Stop Minute
0' – 59'
7021 Setpoint
5.0% – 100.0%
7022 Timer
0.0 s – 990.0 s
7023 Minimum load
0.0% – 100.0%
7061 Fail Delay
1.0 s – 990.0 s
7062 Mains OK Delay
10.0 s – 9900.0 s
7063 U<
80.0% – 100.0%
7064 U>
100.0% – 120.0%
7065 Mains Fail Control
Start eng. + Open MB –
Start eng.
7071 Fail Delay
1.0 s – 990.0 s
7072 Mains OK Delay
10.0 s – 9900.0 s
7073 f<
80.0% – 100.0%
7074 f>
100.0% – 120.0%
7031 Setpoint
0.0% – 80.0%
7032 Timer
0.0 s – 990.0 s
7041 Setpoint
1.0% – 100.0%
7042 Timer
0.5 s – 999.0 s
7043 Return mode
Semi-Auto – Auto
7044 Type
Simple
Load
Full
7051 Power
0.0% – 100.0%
7052 Power Factor
0.6 – 1.0
7081 Mode shift
Off – On
7082 MB close delay
0.0 s – 30.0 s
7083 Backsync
Off – On
7084 Sync to mains
Off – On
7085 Breaker type
MB – No breaker
7086 MB load time
0.0 s – 30.0 s
7000 Mains power
7030 Stop generator
7060 U mains failure
7070 f mains failure
7080 MB control
7040 Test
7050 Fixed power test
7010 Daytime period
7020 Start generator