- 78 -
Maintenance
Maintenance schedule
Before carrying out any maintenance activity, check that the start switch is in position O and that no electrical power is present on the terminals.
Maintenance schedule
Daily Initially
Every 50
hours
Small
Yearly
Every 500
hours
Normal
Every 1000
hours
Every 2
years
Every 2000
hours
Service pak - - 2912 4505 04 2912 4506 05 2912 4507 06
For the most important subassemblies, Atlas Copco has developed service kits that combine all wear parts. These service kits offer you the benefits of genuine parts,
save on administration costs and are offered at reduced price, compared to the loose components. Refer to the parts list for more information on the contents of the
service kits.
Check coolant level (1) x x x x x
Check oil level in sump x x x x x
Check oil pressure on gauge x x x x x
Check vacuum indicator x x x x x
Check and drain fuel pre-filter/Water separator x x x
Check and clean radiator and intercooler fins x x x x
Clean air cleaner and dust bowl x x x x
Check oil, fuel and water leaks x x x x
Check level battery electrolyte x x x x
Check condition of vibration dampers x x x x
Check tension and condition of drive belt(s) x x x
Check and adjust valve clearance (2) x x
Check fuel injectors xx
To Next Page
Loading...
