EasyManuals Logo

ATN Zebra 16 Operator's And Safety Manual

Default Icon
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
OPERATOR AND SAFETY MANUAL
16
1NO0035UK-05
Zebra 16
DANGER
NEVER MOVE THE MACHINE OR MOVE PERSONNEL NEAR ELECTRICAL CABLES
OR EQUIPMENT.
ALWAYS ASSUME THAT THE ELECTRICAL CABLES OR APPLIANCES ARE LIVE
UNLESS YOU ARE SURE THAT THE POWER HAS BEEN CUT.
PERSONNEL ON THE GROUND MUST KEEP AWAY IF THE MACHINE IS BEING USED
NEAR ELECTRIC LINES OR POWERED EQUIPMENT.
IN THE EVENT OF CONTACT WITH AN ELECTRIC LINE OR POWERED APPLIANCE,
PERSONNEL ON THE GROUND MUST KEEP AWAY FROM THE MACHINE UNTIL THE
ELECTRIC POWER IS CUT.
2.4. ELECTROCUTION HAZARDS
This machine is not insulated and does not offer any
protection when near or in contact with an electric
current.
Maintain a minimum safety distance in relation to
electric lines (insulated or otherwise) or powered
devices. The minimum distances indicated in the table
below are provided for information purposes.
Regulations specific to the country or site where the
machine is used may demand greater safety distances.
Take into account the machine's movements and
possible sway of the electric lines.
Never raise the platform during a storm or lightning.
Phase to phase
voltage
Minimum safe
distance
0 to 300 V
Avoid contact
300 V to 50 KV
3.05 metres
50 KV to 200 KV
4.60 metres
200 KV to 350 KV
6.10 metres
350 KV to 500 KV
7.62 metres
500 KV to 750 KV
10.67 metres
750 KV to 1000 KV
13.72 metres

Other manuals for ATN Zebra 16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ATN Zebra 16 and is the answer not in the manual?

ATN Zebra 16 Specifications

General IconGeneral
BrandATN
ModelZebra 16
CategoryBoom Lifts
LanguageEnglish

Related product manuals