This machine is a Mobile Elevating Work Platform intended to take to a work station at height,
personnel, tools and materials NEEDED to carry out work FROM the platform. Contact the
manufacturer for any information about a specific use or working condition.
The machine has a main control station on the work platform which is used to command the
elevation and drive movements.
A priority control station on the ground is used to raise or lower the platform in the event of an
emergency, when the operator on the work platform cannot operate the machine. Except for an
emergency, the ground control station must not be used when people are on-board the work
platform.
Read the safety instructions in Section 2 of this manual before using the machine.
4.1. CONTROLS AND INDICATORS
4.1.1 GROUND CONTROL STATION