CHECK THE CAPACITY OF THE
LIFTING EQUIPMENT AND
ACCESSORIES BEFORE RAISING THE
MACHINE.
CHECK THAT THE PIVOTING MOTOR
SUPPORT IS CORRECTLY LOCKED.
WHEN HANDLING THE MACHINE,
THERE MUST BE NO PEOPLE OR
MATERIAL ON THE WORK PLATFORM.
4.6. HANDLING - STOWAGE FOR TRANSPORT
4.6.1 HANDLING
The machine may be handled using a crane
or similar equipment using the lifting/stowage
rings on the chassis. You must then use
adapted lifting accessories to avoid
damaging the machine.
For the operation, the machine must be
placed in parking-storage position as
described in Section 4.5.
4.6.2 STOWAGE FOR TRANSPORT
During transport:
• The machine must be in transport position.
• The machine must be solidly secured to the vehicle platform as shown below. Use chains
or slings rather than textile straps. In addition, the wheels may be chocked.
To Next Page
Loading...
Need help?
General
