8- Hydraulic / fuel tank compartment: No oil leaks on the hydraulic manifolds or tank–
Connectors on the hydraulic distributors and sensors correctly installed/connected – No
damaged electric cables – Hydraulic oil level in the tank ok.
Fuel level – Fuel tank cap present.
9- Ground control station: The control station switches are present and return to neutral position
– The emergency stop switch is operating correctly.
10- Structure position sensor.
11- Hydraulic cylinders.
12- Articulation pins: lock pin screws present.
13-Rotator cylinder
14- Guard rail: condition – Access rail drops down correctly.
15- Platform control station: Correctly secured - The levers and switches are present and return
to neutral position – The validation pedal is correctly attached and is operating correctly.
The emergency stop switch is operating correctly.
To Next Page
Loading...
Need help?
General
