Use the right hand arrows to select the records group to be viewed then press [OK].
- System log MD3
- Records / system faults relating to the MD3 module.
- System log MC3
- Records / system faults relating to the MC3 module.
- Hydraulic oil temperature
- Time during which the hydraulic oil temperature was measured at the intervals
indicated.
- Revisions
- Date and number of hours (engine time counter running) when the pre-
programmed maintenance operations were validated.
- Diesel engine
- Engine usage time at high speed
- Engine usage time on slowdown
- Accelerations (number of changes to high speed)
- Number of engine starts
- Usage
- Inactivity time (engine running)
- Elevation function usage time
- Sideways movement function usage time
- Auxiliary group
- Date and usage duration of the auxiliary group
- Auxiliary group (Total)
- Total duration and date of last use of the auxiliary group