26
⚫ 2. Light emitting mode: (status: spot\continuous\swing)
⚫ Corresponding to the touch screen "laser mode" parameter, the
"continuous" light mode, "spot" light mode, and "swing" light mode can
be adjusted.
⚫ 3. Laser power: (range 0%-100%)
⚫ Corresponding to the "peak power" parameter of the touch screen, adjust
the maximum power during the stable light emission period.
⚫ 4. Scanning width: (range 0mm-5mm)
Corresponding to the "scan width" parameter of the touch screen. Set
the beam swing width.
⚫ 5. Spot enable: (status: on\off)
⚫ Corresponding to the touch screen "spot enable" parameter, turn on/off
the swinging spot.
⚫ 6. Spotting time: (range: 0S-1.0S)
Set the light emission time in the spot mode corresponding to the
"pulse time" parameter in the "advanced parameters" interface of the
touch screen.
⚫ 7. Wire feeding speed: (range: 0-55mm/S)
Set the running speed of the wire feeder corresponding to the "Wire
feeding speed" parameter on the touch screen.
⚫ 8. Language switching: (Status: Chinese\English)
Switch the interface language display. support: Simplified Chinese,
English.
To Next Page
Loading...