49
2) The progress bar indicates the current update progress. After the program
update is completed (100%), follow the prompts to remove the U disk and restart
the system;
3) If the update fails, you can click the "Start Update Button" again.
Notice:
1) The update files of the touch screen and the controller should be placed
in the root directory of the U disk, as shown in Figure 6-4. Among them,
"compile" is the update file of the touch screen, and "HWSPart1.bin" and
"HWSPart2.bin" are the update files of the controller. The user must not change
these two file names, otherwise the program cannot be updated!
2) It is recommended to use a FAT32 format USB flash drive for updating
the program. (After entering the U disk catalog, right-click "Properties" to
view the format of the U disk, as shown in the figure below.)
To Next Page
Loading...