EasyManua.ls Logo

Audi A4 2010 - Page 146

Audi A4 2010
354 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1111 ...... __ T_r_a_n_ s_m __ is_s_io_ n _____________________________________________________ _
- Press an d hold the release button in t he select or lever
handle, move t he selector lever int o
P an d the n let go of
the re lease but t on
=> & .
The sele cto r lever must be in N or P. If one of the driving positio ns is
engaged a safety switch will prevent the eng ine from being started.
See also =>
page 104 .
Before you move the selecto r lever from t he P position, you must
always app ly the brake peda l befo re and while depressing the button
in the handle of the sele cto r lever.
& WARNING
Unintended vehicle movement can cause serious injury.
- When the selector leve r is in a driving position, the vehicle
may creep, even at idle speed. Therefore do not relea se the
parking brake or foot brake until you are ready to move ,
becau se power is tran smitted to the wheels as soon as a driving
position is engaged .
- Do not accelerate while selecting a driving position. At this
time the engine must be at idle speed so that undue stress is
not placed on the clutche s in the transmi ssion .
- Remember : Even when stopped briefly with the automatic
tran s miss ion in D,S or R, engine power is being transmitted to
the wheels. Your vehicle could "creep " forwa rd or backward.
When stopped , keep th e brak e pedal fully depressed and use
the park ing brake if necessary to keep the veh icle from rolling .
If the selector lever is unintentionall y moved into N while you
are driving, take your foot off the accelerator pedal and wait for
the engine to return to idle speed before selecting a driving posi -
tion.
Never shift into R or P when the vehicle is in motion .
Never get out of the driver's seat when the engine is running.
If you must get out of the vehicle, move the selector lever
securel y into the P position and apply the pa rking brake firmly.
& WARNING (continued )
If the engine mu st remain running , never have any driving
position engaged when checking under the hood .
Make sure the
selector lever has securely engaged and is locked in P with the
parking brake firmly set =>
page 259, "Engine compartment ".
Otherwi se, any increase in engine speed may set the vehicle in
motion , even with the parking brake applied.
Applies to veh icles: with mu lt itron ic or t iptron ic
Selector lever positions
This sec tion describes the selector lever positions and
driving ranges.
Fig. 14 0 Display in
t he in strum ent cluster :
select or lever in posi -
t ion P
The selector lever position engaged appears next to the selector lever
as well as in t he instr ument cluster disp lay.
P - Park
In this selector lever posit ion the transmission is mecha nically
locked. Engage P only when the vehicle is
completely stopped=> &
in "Driving t he automatic t ransm ission" on page 143.
To shift in or out of pos ition P, you must first press and hold the brake
peda l
and then press the release button in the selecto r lever handle .,_

Table of Contents

Related product manuals