Audi A4 2010 - Power Front Seat Adjustment

Power front seat adjustment
Applies to vehicles: with power adjusta ble seats
Seat adjustment controls
The operating logic for the switches corresponds to the
construction and function of the seat.
Fig. 66 Front seat :
Controls for seat
adjust ment
The switch es to adjust th e seat cushion and the seat back correspond
to the layout , the design and the function of the seat . The seats are
adjusted by moving the switches following this logi c.
Controls
@ Lumbar support*
@ Seat adjustment
© Seat back and head restra int height adjustment*
@ Upper thigh support* •
Cont rols and equip-
ment
Vehicle OP-eration
Seats and storage
Applies to vehicles: with power adjusta ble seats
Adjust ing the seat
Position, angle and shape of the seat can be adjusted
electrically to ensure safe and comfortable seating.
Read and follow the warning notices => & before you adjust
your seat.
Adjusting the curvature of the lumbar
support*
- Push the switch plate @ forward or backward to increase
or reduce the curvature .
Adjusting the height of the lumbar support*
- Push the switch plate @ up or down to position the curva-
ture higher or lower.
Fore-and-aft adjustment
- Push the switch @ forward or backward => f ig. 66 .
Adjusting seat height
- Pull or push the switch ® up or down.
Front seat cushion up / down
- Press the switch ® at the front up or down .
Rear seat cushion up / down
- Press the switch ® at the rear up or down.
Adjusting seat back angle
- Push the switch @ forward or backward.
Vehicle care Do-it-yourselt service iTechnical data