Op e n ing and closing
Mechanical e mergency closing
- You will find the screwdriver in the vehicle tool kit
=>
page 306 and the crank in the fuse cover => page 315,
fig . 223 .
- Remove the screw =>
page 51, fig . 45 -Arrow-from the
lighting unit and pull the lighting unit out carefully.
- Push the crank into the hexagona l hole as far as it will go
=>
page 51, fig. 46 and turn it . The roof will close.
[ i ] Tips
The crank is easier to turn if you use the screwdriver handle (vehicle
too l kit) as an aid. •
To Next Page
Loading...
