(]] Tips
The system works above a speed of about 6 mph (10 km/h) . •
Emergency flashers
~
The emergency flashers makes other motorists aware
that you or your vehicle are in an emergency situation.
Fig. 51 Emergency
flasher switch
- Press the switch ~ => fig. 51 to turn the emergency
flashers on or off.
When the emergency flashers are on, all four turn signals blink at the
same time . The turn signal indicator lights ¢¢ in the instrument
cluster, as well as the light in the emergency flasher switch ~ blink
likewise . The emergency flashers also work when the ignition is
turned off.
The emergency flashers will turn on automatically if you are in an
accident where the airbag has deployed.
(]] Tips
You should turn on the emergency flashers when :
• you are the last vehicle standing in a traffic jam so that any other
vehicles coming can see you, or when
Cont rols and equip-
ment
Vehicle OP-eration
Clear visi on
• your vehicle has broken down or you are in an emergency situa-
tion, or when
• your vehicle is being towed by a tow truck or if you are towing
another vehicle behind you . •
Turn signals - ¢ Q and high beam gD lever
The lever on the le~ side of the steering column is used to
operate the turn signals and the high beam as well as the
headlight flasher.
Fig. 52 Turn signal
and high beam lever
The turn signal and high beam lever has the following func-
tions:
Turn signals¢¢ (D@
- Push the lever up as far as it can go to turn on the right
turn signal or down to turn on the left turn signal
=> fig. 52 .
- Move the lever briefly until you meet resistance and
release it to flash three times.
- Move the lever (up or down) until you meet resistance and
hold it there to determine the flashing time for the turn
signals. _.,
Vehicle care Do-it-yourselt service iTechnical data
To Next Page
Loading...
