Audio Technica AT-LP60XBT User Manual

* An audio adapter (sold separately) may be required to connect the RCA audio cable to the line input jack of the PC
sound card.
When connecting via Bluetooth, using the pre-amplifier selector switch is not necessary.
Connecting the device
Align the settings for the pre-amplifier selector switch and connect the RCA audio cable to an input jack that is
compatible with the connectable equipment you are using (amplifier, receiver, active speakers, sound card, etc.).
The RCA audio cable’s red jack is for the right (R) channel, and the white jack is for the left (L) channel.

Audio Technica AT-LP60XBT Specifications

General

Type	Belt-drive audio turntable
Operation	Fully automatic
Motor type	DC servo motor
Drive system	V-belt
Output level	150 mV
Product color	Black
Wow & flutter	0.25 %
Nominal speeds	33 1/3, 45 RPM
Platter material	Aluminum
Built-in phono preamplifier	Yes
Signal-to-Noise Ratio (SNR)	50 dB
Power supply type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	115/230 V
Quantity	1
Cables included	Audio (3.5mm)
USB ports quantity	0

Weight and Dimensions

Depth	373.3 mm
Width	359.5 mm
Height	97.5 mm
Weight	2600 g