- 58 -
g. Press the F11 key to confirm and wait:
h. Press the Enter key to exit.
i. Press the Esc key, and then press the F12 key to restart the ZPLS.
8. Access the VMWare’s web-based management interface:
a. Open your web browser and browse to
https://<local IP address configured above>/ui/#/login:
b. Log in using the same password that is used for accessing the ZPLS through serial (root’s
password).
9. Install the VMWare’s license:
a. Navigate to Manage, and select the Licensing tab:
To Next Page
Loading...
