AudioCodes MediaPack Series MP-11x - Connecting MP-124 to the Ethernet Network; Figure 3-7: RJ-45 Connector Pinouts for Ethernet Connection; Figure 3-8: Connecting to the Ethernet

Version 6.6 29 April 2012
Hardware Installation Manual 3. MP-124 Hardware Installation
3.4.2 Connecting MP-124 to the Ethernet Network
The procedure below describes how to connect MP-124 directly to the Ethernet network.
This cabling requires a crossover Ethernet cable with the following RJ-45 connector
pinouts:
Figure 3-7: RJ-45 Connector Pinouts for Ethernet Connection
 To connect MP-124 directly to the Ethernet network:
1. Connect one end of a crossover RJ-45 Ethernet cable to the Ethernet port (labeled
ETHERNET).
Figure 3-8: Connecting to the Ethernet
2. Connect the other end of the cable to the Ethernet network.