Verifit
®
User's Guide Version 3.12
November 2015
Mouse, keyboard, barcode scanner
The Verifit may be operated from the built-in keypad, a mouse or a standard computer (QWERTY) keyboard,
which may also be used to enter headers and comments on printouts. A USB mouse or keyboard may be plugged
directly into any of the USB ports provided. See Input device operation. Verifits with serial numbers below 4671
also have connectors for a PS2 mouse and keyboard.
An optional barcode scanner may be connected to a USB port to enter threshold, UCL and RECD data directly
from Audioscan printouts. Barcoded threshold data printed by some Grason-Stadler audiometric equipment may
also be scanned. Scanners other than that supplied by Audioscan may not work and are not supported by
Audioscan.
Monitor headphones
Failure to follow operating instructions could place the user or operator at risk.
18
To Next Page
Loading...