Verifit
®
User's Guide Version 3.12
November 2015
There are connectors on the rear of the main display unit for 4 USB devices (flash drives, a QWERTY keyboard,
mouse, printer, barcode scanner), external speakers, an external HDMI monitor and connection to a network
(LAN) (serial number 4671 and higher). Units with serial number below 4671 have connectors for 2 USB
devices, an external VGA monitor, parallel printer, external speakers, a local area network (LAN) and an
RS223 serial port (not supported in this version of software).
Electrical supply input requirement: 100 – 240 Vac 47 – 63 Hz 250VA
A hospital grade grounded outlet is required.
Associated items and supplies
VA-100 Soft case for Verifit
VA-111 External speaker with folding stand and clips for microphone extension cables
VA-120 Barcode scanner for reading barcoded audiometric data on printouts from Audioscan analyzers
VA-131 Microphone extension cable (3') for use with Audioscan analyzers
VA-133 Microphone extension cable (10') for use with Audioscan analyzers
VA-201 NOAH® module allows a networked PC running NOAH to exchange data with Audioscan analyzers
RE201-25 Thermal printer paper for the internal printer in the Verifit
RE367-36 Probe microphone tubes for single patient use (36 per bag)
SAFETY WARNINGS and NOTICES
For purposes of IEC 60601-1, this product is Class I with Type BF applied parts. The applied parts are:
1.Probe tube
2.Foam eartip
3.Probe microphone
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation
This Class A digital apparatus complies with Canadian ICES-003
This symbol on the product is a WARNING describing a foreseen risk
WARNING: To avoid the risk of electrical shock, use only the power cord supplied with the Verifit and
connect it only to a grounded (protectively earthed) electrical outlet.
WARNING: To allow electrical power to be rapidly disconnected in the event of an emergency, position the
Verifit in an accessible location so that the power cord may be quickly disconnected.
7
To Next Page
Loading...
