audioscan Verifit VF-2 - Page 26

Verifit
®
User's Guide Version 3.12  November 2015
1. Press <Setup>, then highlight and <PICK> [Save option]
2. Highlight and <PICK> [Save test setups on power off] to toggle between Yes and No.
To enable/disable erasing of test levels, stimuli and assessment parameters when Erase data is selected:
1. Press <Setup>, then highlight and <PICK> [Save option]
2. Highlight and <PICK> [Save test setups on erase data to toggle between Yes and No.
26