10
Getting Started
XM Activation
Activating your XM® radio service is easy. You have one of two choices
to activate your service: Online or by Phone.
Online Activation Process
First, please make sure the Xpress XM® unit is working properly by
tuning to the XM® Preview channel (#1). If you can hear XM® Preview,
your equipment is ready.
NOTE: The antenna must be installed on the outside of your vehicle for
best performance.
Next, make sure you have a credit card and your XM® Radio Hardware
ID handy. You can display your ID by tuning your XM® Radio to chan-
nel ‘0’, one down from XM® Preview (For tuning instructions see the
Receiver Control Features section of this guide.)
To obtain the XM® identification (ID) number, tune to channel 0 and press
the Rotary/Select Knob. The 8-character alphanumeric XM® ID will
appear on the screen. Write the alphanumeric ID below (Figure 1) for
future reference.
NOTE: No adjustments are allowed in this mode. To exit the Radio ID
screen, tune to any channel by turning the rotary knob and press.
To Next Page
Loading...
Need help?
General
