1. Load: it loads the entire bit Nove configuration from
a previously saved file (e.g.: “bit Nove setup1.bt9”).
This function is present in both TARGET mode
and in OFF LlNE mode.
In TARGET mode it can reload all of the previously
saved settings. This function is useful if you wish
to install another bit Nove with the same settings.
The input level calibration and, possibly, the De-Eq
levels must be repeated.
In OFF LINE mode, you can check the previously
saved settings.
2. Save Setup: it saves the entire bit Nove configuration
for bit Nove in one file (e.g.: “bit Nove setup1.bt9”), that
can be reloaded on the bit Nove later using the Load
Setup function. This function is available in both
TARGET mode and in OFF LINE mode.
3. More setup files (online): this function requires an
internet connection. By clicking on this entry, a link to
download new installation setups appears.
5. Exit: exits the PC software.
Remark: other languages may also be available. Verify through "Check for Updates"
4. Preferences: it allows you to display the context
messages in the chosen “Language” (Italian or English).
The PC Software automatically defaults to English.
To change the language, select language from the
menu and restart the PC Software.
By clicking on the File tab, a drop-down menu appears with the
entries shown in the image:
7.3.2 FILE MAIN MENU
7.3.3 MEMORIES MAIN MENU
3
2
7
By clicking on this item, a drop-down menu appears
with the entries shown in the image:
1. Copy memory.
2. Reset current memories: resets the crossover and
standard equalizer values, the ones proposed
at the end of the configuration procedure.
3. Load memory from file: it loads a previously saved
memory, by placing it in one of the two available memories.
1
2
3
7
1
2
3
4
5
To Next Page
Loading...
