The following paragraphs describe the functions to adjust the system and its acoustic fine tuning.
This window shows whether the bit Nove is properly interfaced with the PC and the DRC. It also shows the Firmware
version for the device and the Serial Number.
If you choose to leave the speakers/amplifiers connected to the bit Nove, remember to make adjustments with a
general volume that won’t damage the other speakers in the system.
(see sec. 7.3.13.6)
7.3 ADJUSTING ACOUSTIC REPRODUCTION
WARNING: when exploring the functions, do not change the parameters on bit Nove. Take your time to get familiar
with the possibilities the software offers.
7.3.1 DEVICE INFO
1
14
13
10
11
7
12
15
1
2
9
8
3 4 5 6
7
To Next Page
Loading...
